[alberg30] Exhaust - Muffler

[George Dinwiddie]

Lincoln,

My exhaust is similar to what you describe, but the third turn is
a 45 instead of 90 degree elbow.  This is where the water is injected.
You really don't want water backing up into the exhaust manifold.

I'll try to remember to measure the vertical measurement of my exhaust.

There's a really good Atomic 4 mailing list.  You can join it
by sending an email to atomic4-list-subscribe at sailnet.net if
you're interested.

 - George

> Lincoln Finkenberg said:
> 
>   I've pulled out the dry exhaust and now wish to install a wet 
> exhaust.  The new muffler is currently fastened behind the manifold 
> about 4-6 inches to the port side, which puts it event to slightly 
> above the manifold.  It looks like a 90 degree elbow has to go from 
> the manifold to send the exhaust up and above the muffler and then 
> another 90 degree elbow to send the exhaust horizontal and then 
> another 90 degree riser/elbow to send the exhaust down, this last 
> elbow would catch the water and cool the exhaust and send it to the 
> muffler.

-- 
 ----------------------------------------------------------------------
  George Dinwiddie                                  gdinwiddie at min.net
  The gods do not deduct from man's allotted span those hours spent in
  sailing.          http://ourworld.compuserve.com/homepages/Alberg30/
 ----------------------------------------------------------------------


------------------------------------------------------------------------
Missing old school friends?  Find them here:
http://click.egroups.com/1/4055/8/_/476031/_/959715287/
------------------------------------------------------------------------


 959715279.0