[Alberg30] rigging

[Gord Laco]

  +--------------------------------------------+
  | Visit the incipient Alberg 30 Online Store |
  |      http://www.alberg30.org/store/        |
  +--------------------------------------------+
Mate - I would not recommend aluminum anywhere in your standing rigging
unless you have fittings made of particularly hard alloys made to the
purpose.  Actually, since the aluminum would have to be of quite deep
section to match the strength of Stainless steel, the weight savings would
not be that terrific.  However, if you chose titanium....

Gord KC 426

----- Original Message -----
From: <ICARUS21E at aol.com>
To: <public-list at alberg30.org>
Sent: Monday, November 27, 2000 7:05 PM
Subject: [Alberg30] rigging


>   +--------------------------------------------+
>   | Visit the incipient Alberg 30 Online Store |
>   |      http://www.alberg30.org/store/        |
>   +--------------------------------------------+
> I'd be interested in the cost of replacing standing rigging. Cost by do it
> yourselfers and cost by a rigger/boat yard.
>
> Also- stainless is the norm, does anyone use aluminum? pros/cons?
>
> Thanks-
> Fred Fraim
> _______________________________________________
>  Public-list mailing list -- Public-list at alberg30.org
>  http://www.alberg30.org/mailman/listinfo/public-list
>  To unsubscribe: email to Public-list-request at alberg30.org
>  Include command "unsubscribe <password>" in subject or body.
>  Use command "help" for more options.

_______________________________________________
 Public-list mailing list -- Public-list at alberg30.org
 http://www.alberg30.org/mailman/listinfo/public-list
 To unsubscribe: email to Public-list-request at alberg30.org
 Include command "unsubscribe <password>" in subject or body.
 Use command "help" for more options.

 975421224.0