[Alberg30] Alcohol Stove

[John Bailey]

Alan,

Have you had to rebuild in recent years.  I think mine may be the original and the people I bought the boat from didn't think it would work.  So, I think I may have to replace some parts.

John Bailey
"Zevulun" #33
  
  ----- Original Message ----- 
  From: Alan P. Kefauver 
  To: public-list at alberg30.org 
  Sent: Sunday, October 01, 2000 12:03 PM
  Subject: Re: [Alberg30] Alcohol Stove


  On the other hand, my pressurized alcohol Homestrand works great, small flames when preheating, cooks fine with cast itron skillets. Flush mount, and serves as a cutting board when closed.
  Alan 
  Andante#152
  *********** REPLY SEPARATOR ***********

  On 10/1/2000 at 7:30 AM Guy Lalonde wrote:
    John,
     
    get rid of it. Get a NON-pressurized alcohol stove. They are much safer. Origo makes a few models, and even a portable heater unit that doubles as a stove.
     
    Guy
    #466
      ----- Original Message ----- 
      From: John Bailey 
      To: Alberg 30 
      Sent: Saturday, September 30, 2000 10:32 PM
      Subject: [Alberg30] Alcohol Stove



       I have took my stove out to clean up and see if I could make it work.  It was in sad shape when I bought the boat last year.  It is a Homestrand, Model 206 made in Larchmont, NY.  It cleaned up OK.  It seemed to work like my old backpacking stove.  It needs to heat up before it starts mixing air and fuel effectively. When I started it up it really flamed.  Is this normal and if so, are there any tricks so as not to burn the boat.

      John Bailey
      "Zevulun"  #33
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20001001/96df6a98/attachment-0004.htm>