[alberg30] teak

[Alan P. Kefauver]

Yup that's my Andante.

What I want is more information on the refit of the boat showing the interior (Quest #115). Small bronze opening ports in the main cabin? Wood bulkheads on the aft end of the interior cabin? Wood cabin ceiling? and I really like the icebox design (and the steps).

Inquiring minds want to knw the story.

Alan

*********** REPLY SEPARATOR  ***********

On 10/26/2000 at 8:39 AM Brian Zinser wrote:

>Alan, is that your Alberg 30 featured in the new Good 'Ole Boat? For those
>of you who don't get the magazine, nice article by John Vigor on Alberg 30s
>in recent issue.
>
>Brian
>Manana #134
>
>-----Original Message-----
>From: Alan P. Kefauver [mailto:apk2 at home.com]
>Sent: Wednesday, October 25, 2000 9:25 PM
>To: alberg30 at egroups.com
>Subject: Re: [alberg30] teak
>
>
>That's a pretty good price. It's around $21/bdft here in Baltimore. We jave
>5/4
> through 8/4 if needed.
>Andante #152
>*********** REPLY SEPARATOR  ***********
>
>On 10/26/2000 at 12:49 AM Bill Ydel wrote:
>
>>I am in the process of building new companion way boards. The local
>>(Charlotte, NC) hardwood place only has 1" rough cut boards for
>>$18.90 per bd/ft. I am looking for 5 quarter stock so I can finish to
>>a full 1". I am planning on making the bottom board solid about 8"
>>and building 2 frames for the top, one to have smoked Lexan and the
>>other screen.
>>Any leads on Teak would be appreciated.   THANKS
>>
>>Bill Ydel
>>SallyB
>>#441
>>
>>
>
>
>
>
>
>
>
>




-------------------------- eGroups Sponsor -------------------------~-~>
eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9699/10/_/476031/_/972599788/
---------------------------------------------------------------------_->



 972599779.0