[alberg30] teak

[John Birch]

Nobody - George just having a little fun me thinks ; )

"Alan P. Kefauver" wrote:

> Who built A30's other than Whitby? Didn't know there were any other builders.
> Alan
> *********** REPLY SEPARATOR  ***********
>
> On 10/26/2000 at 7:42 PM George Dinwiddie wrote:
>
> >I'm not sure, but I think that boat may be one built on the West
> >Coast, not by Whitby.
> >
> > - George
> >
> >"Alan P. Kefauver" wrote:
> >>
> >> Yup that's my Andante.
> >>
> >> What I want is more information on the refit of the boat showing the interior (Quest #115). Small bronze opening ports in the main cabin? Wood bulkheads on the aft end of the interior cabin? Wood cabin ceiling? and I really like the icebox design (and the steps).
> >>
> >> Inquiring minds want to knw the story.
> >>
> >> Alan
> >>
> >> *********** REPLY SEPARATOR  ***********
> >>
> >> On 10/26/2000 at 8:39 AM Brian Zinser wrote:
> >>
> >> >Alan, is that your Alberg 30 featured in the new Good 'Ole Boat? For those
> >> >of you who don't get the magazine, nice article by John Vigor on Alberg 30s
> >> >in recent issue.
> >> >
> >> >Brian
> >> >Manana #134
> >> >
> >> >-----Original Message-----
> >> >From: Alan P. Kefauver [mailto:apk2 at home.com]
> >> >Sent: Wednesday, October 25, 2000 9:25 PM
> >> >To: alberg30 at egroups.com
> >> >Subject: Re: [alberg30] teak
> >> >
> >> >
> >> >That's a pretty good price. It's around $21/bdft here in Baltimore. We jave
> >> >5/4
> >> > through 8/4 if needed.
> >> >Andante #152
> >> >*********** REPLY SEPARATOR  ***********
> >> >
> >> >On 10/26/2000 at 12:49 AM Bill Ydel wrote:
> >> >
> >> >>I am in the process of building new companion way boards. The local
> >> >>(Charlotte, NC) hardwood place only has 1" rough cut boards for
> >> >>$18.90 per bd/ft. I am looking for 5 quarter stock so I can finish to
> >> >>a full 1". I am planning on making the bottom board solid about 8"
> >> >>and building 2 frames for the top, one to have smoked Lexan and the
> >> >>other screen.
> >> >>Any leads on Teak would be appreciated.   THANKS
> >> >>
> >> >>Bill Ydel
> >> >>SallyB
> >> >>#441
> >> >>
> >> >>
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >>
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20001027/d13e84ef/attachment-0004.htm>