[alberg30] teak

[Brian Zinser]

Alan, is that your Alberg 30 featured in the new Good 'Ole Boat? For those
of you who don't get the magazine, nice article by John Vigor on Alberg 30s
in recent issue.

Brian
Manana #134

-----Original Message-----
From: Alan P. Kefauver [mailto:apk2 at home.com]
Sent: Wednesday, October 25, 2000 9:25 PM
To: alberg30 at egroups.com
Subject: Re: [alberg30] teak


That's a pretty good price. It's around $21/bdft here in Baltimore. We jave
5/4
 through 8/4 if needed.
Andante #152
*********** REPLY SEPARATOR  ***********

On 10/26/2000 at 12:49 AM Bill Ydel wrote:

>I am in the process of building new companion way boards. The local
>(Charlotte, NC) hardwood place only has 1" rough cut boards for
>$18.90 per bd/ft. I am looking for 5 quarter stock so I can finish to
>a full 1". I am planning on making the bottom board solid about 8"
>and building 2 frames for the top, one to have smoked Lexan and the
>other screen.
>Any leads on Teak would be appreciated.   THANKS
>
>Bill Ydel
>SallyB
>#441
>
>








-------------------------- eGroups Sponsor -------------------------~-~>
eGroups eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9698/10/_/476031/_/972564007/
---------------------------------------------------------------------_->



 972563973.0