[alberg30] teak

[George Dinwiddie]

I'm not sure, but I think that boat may be one built on the West
Coast, not by Whitby.

 - George

"Alan P. Kefauver" wrote:
> 
> Yup that's my Andante.
> 
> What I want is more information on the refit of the boat showing the interior (Quest #115). Small bronze opening ports in the main cabin? Wood bulkheads on the aft end of the interior cabin? Wood cabin ceiling? and I really like the icebox design (and the steps).
> 
> Inquiring minds want to knw the story.
> 
> Alan
> 
> *********** REPLY SEPARATOR  ***********
> 
> On 10/26/2000 at 8:39 AM Brian Zinser wrote:
> 
> >Alan, is that your Alberg 30 featured in the new Good 'Ole Boat? For those
> >of you who don't get the magazine, nice article by John Vigor on Alberg 30s
> >in recent issue.
> >
> >Brian
> >Manana #134
> >
> >-----Original Message-----
> >From: Alan P. Kefauver [mailto:apk2 at home.com]
> >Sent: Wednesday, October 25, 2000 9:25 PM
> >To: alberg30 at egroups.com
> >Subject: Re: [alberg30] teak
> >
> >
> >That's a pretty good price. It's around $21/bdft here in Baltimore. We jave
> >5/4
> > through 8/4 if needed.
> >Andante #152
> >*********** REPLY SEPARATOR  ***********
> >
> >On 10/26/2000 at 12:49 AM Bill Ydel wrote:
> >
> >>I am in the process of building new companion way boards. The local
> >>(Charlotte, NC) hardwood place only has 1" rough cut boards for
> >>$18.90 per bd/ft. I am looking for 5 quarter stock so I can finish to
> >>a full 1". I am planning on making the bottom board solid about 8"
> >>and building 2 frames for the top, one to have smoked Lexan and the
> >>other screen.
> >>Any leads on Teak would be appreciated.   THANKS
> >>
> >>Bill Ydel
> >>SallyB
> >>#441
> >>
> >>
> >
> >
> >
> >
> >
> >
> >
> >
> 

-------------------------- eGroups Sponsor -------------------------~-~>
eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9699/10/_/476031/_/972603323/
---------------------------------------------------------------------_->



 972603758.0