[Alberg30] Help-Big Problem

[Mike Lehman]

If you were going to have a yard do the work the estimate I would give would 
be $980; based upon 10 hours @ $60 ($600); $280 for the aluminum plates; 
$100 for misc (epoxy, bolts, paint, caulk etc)


----Original Message Follows----
From: greg vandenberg <fashionguy at ameritech.net>
Reply-To: public-list at alberg30.org
To: public-list at alberg30.org
Subject: Re: [Alberg30] Help-Big Problem
Date: Mon, 30 Apr 2001 10:09:00 -0400

Tom... as  you can see there is a fix for your problem and it will take
some time and some money to do... if you haven't closed your deal you
should make a price adjustment for your or the yards labor and material.
Good Luck...Greg #312 - Grand Rapids

SwiftLaw at aol.com wrote:

 > I am in the process of completing my acquisition of hull #222.  Today
 > I had
 > the yard boss engineer on board. BIG PROBLEM -  the main bracing beam
 > under
 > the deck mount of the Main mast is indented downward, It appears as if
 > the
 > mast is trying to come through the deck. Not too much delamination,
 > but, for
 > illustration, the forward cabin door is about 3/4 inch from closing
 > due to
 > the depression of the beam.
 >
 > Any experience with this? Can I shore it up or should I not complete
 > this
 > purchase and give up on a boat I am already in love with ????
 > Help-Advice-comments please.
 >
 > Thanks
 >
 > Tom Swift- Chicago

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com

 +-----------------------------------------------------------+
 |       Shop SailNet for your Spring outfitting needs.      |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 988640149.0