[Alberg30] Aluminum spreaders

[George Dinwiddie]

Bill,

You might Bill Mattox (limerick227 at aol.com).  Be aware that not all
the spreader mounts are the same.  You'll need to measure yours to
get a good fit.

 - George

"William J. Burke" wrote:
> 
> Does anyone have a favorite supplier for aluminum replacement spreaders?
> Is there a stock spreader that is the correct length and fits the original
> flanges with little or no
> modification?  Thanks,
> 
> Bill Burke
> Wild Elf #297
> 
>  +-----------------------------------------------------+
>  |     http://www.alberg30.org/store/Galison.html      |
>  | Beautiful notecards of the sea, and other fine art. |
>  +-----------------------------------------------------+
> 
> _______________________________________________
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
 +-----------------------------------------------------+
 |     http://www.alberg30.org/store/Galison.html      |
 | Beautiful notecards of the sea, and other fine art. |
 +-----------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 998956420.0