[Alberg30] Anchor bow roller

[Brian Zinser]

The Great Lakes Cruising Club is having their rendezvous in Duluth later
this month.  As a consequence, we have had several transient boats come
through over the last couple of weeks. As a result, I have a question
regarding the possible installation of a bow roller for anchor storage and
deployment.

An Alberg designed Pearson Renegade had simply mounted a basic roller
parallel to the centerline offset enough to allow the clearance for the end
of the cleave pin to attach the forestay to the bow fitting(not sure I'm
using the correct term).  Last night a Cal 31 arrived which appeared to have
a replacement head fitting that combine the bow roller and the bow fitting.
One side of the bow roller channel was raised an additional inch or two with
two or three holes for attaching the forestay.

Two questions.  Has anyone just installed a bow roller like the Pearson
Renegade?  And, does anyone know of a source for a replacement head fitting
similar to Cal 31 set up describe above?

Brian Zinser
Manana #134
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20010711/efca2bde/attachment-0003.htm>