[Alberg30] rubrail

[Roy DeJarnette]

Here is some addiditonal info:

The rub rail was made of oak I had the trapezoidal shape made as the lumber yard
cut it from an 1.5" thick board, it then required hand planing to get it smooth and
to match the pieces. It is made in two pieces with a joint near the center of the
boat. The feature stripe was filled in before thru bolting the rail through the
hull. I first fitted the rail and drilled the holes for the bolts . Then took it
off and put it back on with bedding compound under it. The bolts were counter sunk
in the rail, the rail installed, and the aluminum piece screwed on last.

The rubrail starts about 4' back from the beginning of the stripe, about even with
the front of the forward hatch, with 2' of stripe exposed aft. The aluminum piece
is the same dimension as the stainless piece that runs vertically down the front of
the bow to below the waterline. It's cross section is smaller than what you
propose. Maybe 1.5" tapering to 1"

RDeJarnette wrote:

> I have a rubrail installed on Blue Jay (#372). It is painted blue to match the
> hull color and has an aluminum strip on the outer surface. It is installed over
> the stripe. I will get some details of it's composition, dimensions, fastening
> method, etc.
>
> Jay Davenport wrote:
>
> > I am interested in installing a rubrail on Revolution (#526), about where
> > the molded-in stripe is located 6 inches below the toe rail. What I have in
> > mind is a 20 foot long piece of mahogany with a trapazoidal cross-section of
> > 3" x 3" x 2" x 3". A 3" face would be through-bolted to the hull. The
> > rubrail would extend 3" out from the hull. The outside or "rubbing" surface
> > would be 2". This surface could have a stainless steel strip attached to it.
> > Does anyone have a rubrail already installed on their A30? Any thoughts or
> > suggestions on this project will be appreciated.
> > Jay Davenport
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at http://explorer.msn.com
> >
> >  +------------------------------------------------------------------+
> >  | Simrad TP20 w/ FREE remote, on sale at Sailnet. Search "SIMTP20" |
> >  |    http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066     |
> >  +------------------------------------------------------------------+
> >
> > _______________________________________________
> > Public-list mailing list -- Public-list at alberg30.org
> > http://www.alberg30.org/mailman/listinfo/public-list
> > To unsubscribe: email to Public-list-request at alberg30.org
> > Include command "unsubscribe <password>" in subject or body.
> > Use command "help" for more options.
>
>  +------------------------------------------------------------------+
>  | Simrad TP20 w/ FREE remote, on sale at Sailnet. Search "SIMTP20" |
>  |    http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066     |
>  +------------------------------------------------------------------+
>
> _______________________________________________
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.

 +------------------------------------------------------------------+
 | Simrad TP20 w/ FREE remote, on sale at Sailnet. Search "SIMTP20" |
 |    http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066     |
 +------------------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 995247413.0