[Alberg30] carburetor - Flooding

[Dan Sternglass]

"Furey, Bill (CORP)" wrote:
> 
> I have the same problem on an Atomic 4 with a realtively new facet(moyer's)
> fuel pump.
> The pump sems to flood the carb. If I run the pump prior to starting, & then
> disconnect
> rthe pump, the engine runs fine, until I connect the pump while the engione
> is running
> & it floods the carb & start to stall.

This usually happens becasue the float valve is failing to close,
probably due to crud. I suppose it's possible that the pump is not
reducing pressure when the float valve closes, although I've never heard
of that. 

> 
> Can you give me Don Moyer's web site address?
> 
Moyer marine is http://www.moyermarine.com

Good luck,

--Dan S.
dans at stmktg.com
Watcher of the Skies, #201, 1966, Cayuga Lake, Ithaca, NY


> Thks, W. Furey
 +------------------------------------------------------------------+
 | Simrad TP20 w/ FREE remote, on sale at Sailnet. Search "SIMTP20" |
 |    http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066     |
 +------------------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 995317236.0