[Alberg30] Foresail Found, Murphy subdued, Journey's a go!

[Brian and Elaine Timmins]

Congrats!
----- Original Message -----
From: "Hansen, Richard D. Jr. LTC OF-TF" <richard.hansen at saalt.army.mil>
To: <public-list at alberg30.org>
Sent: Wednesday, June 27, 2001 7:23 PM
Subject: [Alberg30] Foresail Found, Murphy subdued, Journey's a go!


> Thank you Gregg, Brian, Mike, Linc, George, and John for your helpful
advice
> and education.  I drove to Annapolis and purchased 1 of 3 sails (albeit a
> well seasoned one) available to get us up the Bay this weekend.  Thanks to
> the crew at Bacon & Assoc (Mrs Bacon, George, Steve, and Redina).  Good
> quote on new custom sails as well.  I'll ask for more advice on a less
> seasoned sail in separate email.
>
> -----Original Message-----
> From: Hansen, Richard D. Jr. LTC OF-TF
> [mailto:richard.hansen at saalt.army.mil]
> Sent: Tuesday, June 26, 2001 10:28 PM
> To: 'public-list at alberg30.org'
> Subject: [Alberg30] RE: Help! Need foresail for Roller Furling
>
>
> Now I'm getting nervous...been eagerly checking for advice or foresail
> offerors every 15 minutes but alas, none.  Tomorrow a.m. I plan to call
> every sailmaker who's listed in 2001 Chesapeake Bay ALberg 30 Handbook but
> am still eager to hear from y'all.  Thank you.
> RDH Correction #235, Sun Spur.
>
> -----Original Message-----
> From: Hansen, Richard D. Jr. LTC OF-TF
> Sent: Tuesday, June 26, 2001 6:31 PM
> To: 'public-list at alberg30.org'
> Subject: Help! Need foresail for Roller Furling
>
>
> HELP!!  Any suggestions on where I can borrow, rent, or purchase a
foresail
> for furling system quickly for my relocation cruise on Alberg 30 #245 this
> weekend.  Need to get one this Friday by noon.
>
> Details:
> Had roller furling installed at losing marina with apparent
> miscommunications on sail.
> Now have no foresail to make the York River to DC journey; not eager to
fly
> just mainsail.
> I currently live in DC area and can drive to borrow, rent, or buy
foresail.
> Unfortunately, I don't have furling system model # until marina opens
> tommorrow a.m.
>
>
> -----Original Message-----
> From: George Dinwiddie [mailto:gdinwiddie at min.net]
> Sent: Tuesday, June 26, 2001 11:56 AM
> To: public-list at alberg30.org
> Subject: Re: [alberg30] Height of Alberg 30
>
>
> Just for completeness, I'd guess that the mast base is about
> 5 feet (or a little less) above the waterline, giving the
> 43 foot minimum clearance mentioned earlier.
>
> Everyone should note that this clearance is only for bridges, NOT
> POWER LINES.  High-tension lines can arc an amazing distance.
>       http://www.educate.net.au/~bwmw/iinfo.html
> If you add 4 meters (~13 feet) you get a minimum clearance of
> 56 feet for power lines.
>
>  - George
>
> > dickdurk said:
> >
> > Just measured my mast to install new antennae wire-38' from tip of 3
> > db.
> > antennae to mast base (mast itself is 35'1/2"). Alberg will fit
> > easily under
> > Woodrow Wilson Bridge.
> >
> > Michael
> > Checkmate #220
>
> --
>  ----------------------------------------------------------------------
>   George Dinwiddie                             gdinwiddie at alberg30.org
>   The gods do not deduct from man's allotted span those hours spent in
>   sailing.                                    http://www.Alberg30.org/
>  ----------------------------------------------------------------------
>
>  +------------------------------------------------------------------+
>  | Simrad TP20 w/ FREE remote, on sale at Sailnet. Search "SIMTP20" |
>  |    http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066     |
>  +------------------------------------------------------------------+
>
> _______________________________________________
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
>
>  +------------------------------------------------------------------+
>  | Simrad TP20 w/ FREE remote, on sale at Sailnet. Search "SIMTP20" |
>  |    http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066     |
>  +------------------------------------------------------------------+
>
> _______________________________________________
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
>
>  +------------------------------------------------------------------+
>  | Simrad TP20 w/ FREE remote, on sale at Sailnet. Search "SIMTP20" |
>  |    http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066     |
>  +------------------------------------------------------------------+
>
> _______________________________________________
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
>

 +------------------------------------------------------------------+
 | Simrad TP20 w/ FREE remote, on sale at Sailnet. Search "SIMTP20" |
 |    http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066     |
 +------------------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 993690133.0