[Alberg30] RE: Plate Installation

sousa, stephen sousa_stephen at emc.com
Tue May 8 10:30:38 PDT 2001


Tom,

This information is for yourself and anyone else performing this task. The
finishing touches of installing the plates made the modification look like a
factory installation. 

Once the plates were fitted to support beam the current holes were opened up
to 5/16", sanded the wooded beam removing all varnish. I applied West
Systems Epoxy mixed with thickening agent to the plates and put them in
place as the epoxy began to set-up and placed the bolts into the places and
tighten up the entire assembly. The following day placed a bead of 4200
between the plates and the ceiling of the boat. When the sealer had set-up,
masked off the beam and sprayed Appliance Epoxy White on the plates
retaining the look of wood under the plates. The finished product is
impressive and functional.

Regards,
Stephen Sousa 
#114

-----Original Message-----
From: SwiftLaw at aol.com [mailto:SwiftLaw at aol.com]
Sent: Tuesday, May 08, 2001 11:00 AM
To: public-list at alberg30.org
Subject: [Alberg30] Rigging tension


I believe that Mike Lehman was going to post his recommendations for rigging

tension.
Did I miss it?

FYI- I had the dispute with Yard Boss and as a result of this list, have 
taken the project away from them and now await my aluminum plates from 
Washington Aluminum Company. Expect more questions! Thanks again.  
Tom Swift #222
 +-----------------------------------------------------------+
 |       Shop SailNet for your Spring outfitting needs.      |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.
 +-----------------------------------------------------------+
 |       Shop SailNet for your Spring outfitting needs.      |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 989343038.0


More information about the Public-List mailing list