[Alberg30] Stainless Steel?

[sousa, stephen]

Randy,

Either product will do the job. 316 will leach less rust and is a little
stronger than 304,

Stephen Sousa
#114
 
-----Original Message-----
From: Randy Katz [mailto:randyk at bertschi.org]
Sent: Thursday, May 03, 2001 4:43 PM
To: public-list at alberg30.org
Subject: [Alberg30] Stainless Steel?


Hi, Guys,
    Im needing to find/make a new tang for my jib halyard.  The present one
of stainless steel has a hole that's nearly "ripped out."  My question-- is
304-grade adequate for this application?  I've heard of 316-- is that a
preferred grade for this use?

    Any info about this much appreciated!
    Thanks,

>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Randy Katz
Gr. 3 
Bertschi School
2227 - 10th Ave E.
Seattle, WA. 98102
USA
206-324-5476 X301
<<<<<<<<<<<<<<<<<<<<<<<<<<<

 +-----------------------------------------------------------+
 |       Shop SailNet for your Spring outfitting needs.      |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.
 +-----------------------------------------------------------+
 |       Shop SailNet for your Spring outfitting needs.      |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 988923351.0