[Alberg30] two wire and a light bulb.

[Fritz]

Stephen,
I would do it. We didn't the FIRST time. It only took a few days for the
beam to sag again. I just jacked it back up yesterday and put 5 more bolts
through the center section. We decided not to glass the whole thing over
so that may have a bit to do with it. But I'm pretty sure it's not going
to move now. Plus it continued that nice bolt pattern all the way across.
:) Hope this helps.
-Fritz Finley
Backfin #199

On Fri, 18 May 2001, sousa, stephen wrote:

> Mike Lehman,
>
> As you are aware I installed the plates under the mast step on Carina Vela,
> which looks great.  I was wonderinng if it would  benefit the support
> structure to add two additional bolts in the center of the beam and tie the
> plates together there as well. This would place the force of the mast
> equally along the plates and beam?
>
> Thoughts and comments?
>
> Stephen Sousa
> #114

 +-----------------------------------------------------------+
 |       Shop SailNet for your Spring outfitting needs.      |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 990234125.0