[Alberg30] Deck Beam finished
George Dinwiddie
gdinwiddie at min.net
Mon May 21 07:49:19 PDT 2001
Tom,
Congratulations on your successful repair. If you'd like to send your
pictures to webmaster at alberg30.org, I'll post them online.
- George
> SwiftLaw at aol.com said:
>
> Progress made: Washington Aluminum Company forwarded the two precut 3/8
> aluminum plates for the Deck Beam. Per the expert advice on this list and a
> few calls with some of the members, I blew off the yard and effected the
> repair myself.
>
> Prepared old surface by hand (No chemical treatments) while the jack rig
> stayed in place for 5 days increasing the pressure by a half turn a day. The
> aluminum plate did not need much grinding, but accomplished what was
> necessary on board. Clamped up the plates "dry" and marked for drilling. Then
> pre-drilled nine holes on a drill press (seven holes Aft to Forward and two
> Stern to Forward) . Important equipment was the 14" drill bit, brand name
> "The Aggressor." Re-laid up the plates dry. Prepared West Epoxy mixture and
> applied to surfaces both roughed up for the application.
>
> The drilling was time consuming but not extremely difficult. Finally reset
> the plates and drove through all nine 3/8' stainless hex bolts with washers
> for and aft. Applied torque by hand. Released the Jack mount. Closed the
> forward cabin door for the first time ever I think. It looks like it was
> installed by the factory. Yard Boss pissed that we were right. We are please
> to know the boat better and Launch this Thursday. !!!! Thank you all so very
> much. I took pictures. I can post if any interest.
>
> Tom Swift
> #222
--
----------------------------------------------------------------------
George Dinwiddie gdinwiddie at alberg30.org
The gods do not deduct from man's allotted span those hours spent in
sailing. http://www.Alberg30.org/
----------------------------------------------------------------------
+-----------------------------------------------------+
| http://www.alberg30.org/store/Galison.html |
| Beautiful notecards of the sea, and other fine art. |
+-----------------------------------------------------+
_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.
990456559.0
More information about the Public-List
mailing list