[Alberg30] Wiring Diagram & Teak Refinishing

Jack Vanderloo jvdloo at sympatico.ca
Mon Oct 22 12:48:56 PDT 2001


Alan,
Might I similarly prevail upon you?  Address above.  Thanks.
Jack

"David E. Mitchell" wrote:

> Alan,
> Many thanks for the offer. I would appreciate receiving your schematic and
> all the details that you can spare. I do not want to reinvent the wheel.
> Thanks for your help. My information is as follows:
>
> david at mitchellent.com
>
> David Mitchell
> 6831 Gateridge
> Dallas, TX 75240
>
> 972-880-4924
>
> -----Original Message-----
> From: public-list-admin at alberg30.org
> [mailto:public-list-admin at alberg30.org]On Behalf Of Alan P. Kefauver
> Sent: Monday, October 22, 2001 1:16 PM
> To: public-list at alberg30.org
> Subject: Re: [Alberg30] Wiring Diagram & Teak Refinishing
>
> I completely rewired my boat and can send you a schematic with wire sizes,
> breakers, etc. I used a Blue Seas Electrical Panels as the starting point
> and have separate circuits for house batteries and engine batteries, built
> in charger, battery splitters, Heart Interface voltage regulator, Shore
> power etc. New Quartz halogen lights interior and deck light. All ancor
> oversized marine wiring (ie. 1% voltage drop). Each connection is soldered,
> crimped and then sealed with waterproof shrink tube. Expensive and time
> consuming to do correctly and completely, but worth it. My lights don't dim
> when someone kicks on the macerator or water pump. Electrics were the single
> greatest expense in my boat rebuild.
> Alan
> Andante #152
> *********** REPLY SEPARATOR  ***********
>
> On 10/22/2001 at 9:01 AM David E. Mitchell wrote:
>
> >I have recently become the second owner of a 1968 Alberg 30. The boat has
> >been in Lake Ray Hubbard near Dallas, Texas, for over 30 years.
> >
> >I would like to completely rewire the boat. Has anyone undertaken this
> >project and are there any wiring diagrams with materials lists available?
> >
> >All of the bright work on the boat is teak and needs refinishing. What do
> >you recommend? Varnish, Cetol, or Teak Oil?
> >
> >Thanks in advance for your help!
> >
> >David Mitchell
> >
> >
> > +-----------------------------------------------------------+
> > |       Shop SailNet for your Spring outfitting needs.      |
> > | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
> > +-----------------------------------------------------------+
> >
> >_______________________________________________
> >Public-list mailing list -- Public-list at alberg30.org
> >http://www.alberg30.org/mailman/listinfo/public-list
> >To unsubscribe: email to Public-list-request at alberg30.org
> >Include command "unsubscribe <password>" in subject or body.
> >Use command "help" for more options.
>
> -
>
>  +-----------------------------------------------------------+
>  |       Shop SailNet for your Spring outfitting needs.      |
>  | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
>  +-----------------------------------------------------------+
>
> _______________________________________________
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.


 +-----------------------------------------------------------+
 |       Shop SailNet for your Spring outfitting needs.      |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1003780136.0


More information about the Public-List mailing list