[Alberg30] Re: Public-list digest, Vol 1 #339 - 6 msgs

[Jllembo at cs.com]

Industrial belting is the correct material for the engine mounts, Look in the 
yellow pages for a suppliet of  belting It looks like half inch material but 
you must ask a salesman about the material, you want a good fabric, oil 
resistant rubber and  the correct durometer (compression) . They sell this by 
the foot usually 24 inches wide... good luck... Joel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20010902/91e343e7/attachment-0003.htm>