[Alberg30] Engine Removal

[alberg30 at mindspring.com]

Shawn: I removed my Atomic 4 winter 2000 using the main halyard. I wrote an article about it in, I think, the February2001 Chesapeake Bay A30 Association newsletter, complete with photos.

If you are a member, I'll send you a back issue if you missed it. If not I'll send you a complimentary copy----you should consider joining.

I can also email it to you if you like.

Joe #499
"One Less Traveled"
  ----- Original Message ----- 
  From: Shawn W. Orr 
  To: public-list at alberg30.org 
  Sent: Thursday, September 06, 2001 1:13 PM
  Subject: [Alberg30] Engine Removal


  Any tips on removing the engine for a valve job.  I assume that I will be using the main halyard to lift it out?  Also what would be the process to disconnect the engine from the prop shaft?
   
  Thanks,
   
  Shawn Orr
  IL Molino #307
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20010907/7f4a0efd/attachment-0008.htm>