[Alberg30] Original thru hulls

[George Dinwiddie]

Chris,

If you scrape the paint off, it's pretty obvious.  But covered with
paint look for a profile like this cross-section (use a fixed font
like courier):

                 /--|      |--\
         --------   |      |   --------
	/           |      |           \
	---------|  |      |  |---------
		 |  |      |  |
		 |  |      |  |
		 |  |      |  |
		 |  |      |  |
		 |  |      |  |
		 |  |      |  |
		 |  |      |  |
		 ----      ----

 - George

> chrishardy said:
> 
> HEY-- Mike on those original thru hulls--- I'm replacing the gate valve 
> for my head discharge, the thru hull on my boat does not have the small 
> nibs in the bore in order to get a inside wrench onto. It doesn't look 
> homemade but most of the new ones have those little nibs inside the 
> bore. Is there any other distinguishing feature I should look for?   
> chris .... #296


-- 
 ----------------------------------------------------------------------
  George Dinwiddie                             gdinwiddie at alberg30.org
  The gods do not deduct from man's allotted span those hours spent in
  sailing.                                    http://www.Alberg30.org/
 ----------------------------------------------------------------------

 +-----------------------------------------------------------+
 | ** Skymate Windmeter $18.00 off! Product code JDCSM-18 ** |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+


_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1018027177.0