[Alberg30] Rudder fastenings

[George Dinwiddie]

> Capnreitz at aol.com said:
> 
> I'm still looking for a response to my question regarding the rudder shoe and 
> Pintle/ gudgeon. Do the pintle and gudgeon have a washer between them or does 
> the weight of the rudder ride on the gudgeon with the shoe merely giving the 
> rudder a pivot point as well as side to side support.???? My rudder pin wore 
> to 1/4" and I have to replace it. Also would like to know the size of the pin 
> as well as the material. Where can I get a replacement? The screws which 
> comein from the port and starboard sides of the shoe. What size and material 
> are they? Does anyone have a source??

I don't have a washer on the pintles & gudgeons or on the shoe.

The rudder pin is 1/2".  On many boats, it is threaded into the 
bottom of the rudder post.  If that's the case, you can unscrew
the old one and screw in a new one.  Make the new one from a 
bronze bolt by cutting off the head.  You'll need to use your
old one to figure out the length.

On my boat (#543), the pin was part of the 1" rudder post, turned
down to 1/2" on a lathe.  I got it drilled out and tapped, so I
now have a replaceable pin, too.

The screws are also bronze--1" flathead 1/4-20 machine screws.
See http://www.alberg30.org/maintenance/Steering/CreviceCorrosion/
for a picture of them and the reason you MUST use bronze and not
stainless steel.

If you can't find a good source of bronze fasteners locally, you
can always get them from Chesapeake Marine Fasteners
(http://www.chesfast.com/) in Annapolis.

 - George

-- 
 ----------------------------------------------------------------------
  George Dinwiddie                             gdinwiddie at alberg30.org
  The gods do not deduct from man's allotted span those hours spent in
  sailing.                                    http://www.Alberg30.org/
 ----------------------------------------------------------------------

 +-----------------------------------------------------------+
 | ** Skymate Windmeter $18.00 off! Product code JDCSM-18 ** |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+


_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1018882836.0