[Alberg30] Another Mast Beam Question

[Bill Newman]

I am about to do the mast beam repair on #233.  The teak beam is glassed
to the deckhead with what appears to be a single piece of fibreglass
tape that comes down the beam about 2 inches.  This will interfere with
a good flat fit of the aluminum beam to the wood.  Can anyone who has
done this repair, tell me what they did about this?  I am reluctant to
just grind the tape away.  I suppose a compromise is to feather the
lower edge of the tape to achieve somewhat of a flat surface.

Bill Newman
Marion Rose III #233

 +-----------------------------------------------------------+
 | ** Skymate Windmeter $18.00 off! Product code JDCSM-18 ** |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+


_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1019138111.0