[Alberg30] Thanks re: engine stringersMike, Michael, & George

[Randy Katz]

Many thanks for the feedback.  The A-30 website about the engine lift was
very helpful and that's what I'll go for: a few very handy tips there and
the photos added a lot.

There is definite breakage on the std stringer.  It's formed of an upside
down L shape, and evidence of cracking/breaking along the edge where the two
legs of the L are joined is plain.

I was wondering about attempting to prop up and fill the L in order to make
a filled-in U shape, but it seems that if we're going to go so far as to
tackle it at all, we may as well do it right.

I will check the alignment first as per Michael's suggestion, but that being
fine won't alter the fact of the collapsing.

Thanks again to all
Randy

-- 
Randy Katz
#249
910 - 32nd Ave
Seattle, WA. 98122
(206)-323-1941

 +-----------------------------------------------------------+
 | ** Skymate Windmeter $18.00 off! Product code JDCSM-18 ** |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+


_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1019333358.0