[Alberg30] Original thru hulls

[sousa, stephen]

Chris,

When I removed and replaced all the thru hulls, the flange on the thru hull
seemed to larger then the product available today. The nibs didn't exist
either, in some cases I used a 1/4" Dremel bit and cut them out of the hull.

Stephen

-----Original Message-----
From: chrishardy [mailto:chrishardy at tds.net]
Sent: Friday, April 05, 2002 10:30 AM
To: public-list at alberg30.org
Subject: Re: [Alberg30] Original thru hulls


HEY-- Mike on those original thru hulls--- I'm replacing the gate valve 
for my head discharge, the thru hull on my boat does not have the small 
nibs in the bore in order to get a inside wrench onto. It doesn't look 
homemade but most of the new ones have those little nibs inside the 
bore. Is there any other distinguishing feature I should look for?   
chris .... #296

 +-----------------------------------------------------------+
 | ** Skymate Windmeter $18.00 off! Product code JDCSM-18 ** |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+


_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.
 +-----------------------------------------------------------+
 | ** Skymate Windmeter $18.00 off! Product code JDCSM-18 ** |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+


_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1018027179.0