[Alberg30] Roller Reefer

[Pat Drenning]

Bruce,

If you are in the Annapolis area Shaw Welding Co. may be able to weld
the aluminum.  I have used them for both SS and exhause piping on my
boat.  There number is (410) 263-3122
	
			Pat

Bruce MacDonald wrote:
> 
> My A30 has a geared roller reefing gooseneck of cast aluminum. At the top of
> the unit is/was a hole drilled through the casting to accept the mainsail
> clew shackle. The casting broke at this point and there is no obvious
> repair.
> 
> Any ideas on where to get a replacement, with or without roller reefing?
> 
> All suggestions gratefully accepted, especially those received before May 1
> splashing date.
> 
> Thanks in advance.
> Bruce MacDonald
> 
>  +-----------------------------------------------------------+
>  | ** Skymate Windmeter $18.00 off! Product code JDCSM-18 ** |
>  | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
>  +-----------------------------------------------------------+
> 
> _______________________________________________
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
 +-----------------------------------------------------------+
 | ** Skymate Windmeter $18.00 off! Product code JDCSM-18 ** |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+


_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1019434412.0