[Alberg30] Head Seacock Placement

[Neal Jackson]

Mine (No. 486, with a liner) is located under the port settee, about six
inches aft of the wall that separates that locker from the head area.  I is
about four inches inside the vertical frame of that settee.   

-----Original Message-----
From: sousa, stephen (ENG) [mailto:sousa_stephen at emc.com]
Sent: Wednesday, August 21, 2002 2:10 PM
To: 'public-list at alberg30.org'
Subject: [Alberg30] Head Seacock Placement


I am in the process of preparing the installation of the new head and
holding tank. I removed the false floor from the head in #114 to find the
original floor in place (boy does that sae some time) . The fittings were
removed from the hull and holes filled with epoxy. The 1 1/2 fitting backing
plate remains on the hull so that placement is straight forward. The
question I have and hopefully someone can assist is the placement for the
3/4 thru hull fitting. It would seem to be mounted under in the hull under
the floor with the hose running up through the hole into the head intake.
 
Would anyone have a recommendation or suggestion?
 
Thanks,
Stephen
Carina Vela
#114

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20020821/7fb8dcf2/attachment-0004.htm>