[Alberg30] Head Seacock Placement

[sousa, stephen (ENG)]

Mike,
 
I took your advise and installed the 1 1/2 in the hull behind the head and
3/4 fitting under the settee.  A nice clean installation it looks good.
 
Everyone thank you for the input.
 
Stephen
#114

-----Original Message-----
From: Mike Lehman [mailto:sail_505 at hotmail.com]
Sent: Wednesday, August 21, 2002 4:17 PM
To: public-list at alberg30.org
Subject: RE: [Alberg30] Head Seacock Placement



Appearance wise it would look better because the seacock would be out of
view. There may be other advantages too, such as not having someone step on
it or kick it in heavy weather. The disadvantage I see is having to drill a
hole through the bulkhead. It has never caused a problem on the newer style
boats, but I feel the fewer holes the better.

Mike Lehman 
"Gilleleje" #505 

Hammer: Originally employed as a weapon of war, the hammer nowadays is used
as a kind of divining rod to locate expensive car parts not far from the
object we are trying to hit. 


----Original Message Follows---- 
From: "sousa, stephen (ENG)" 
Reply-To: public-list at alberg30.org 
To: "'public-list at alberg30.org'" 
Subject: RE: [Alberg30] Head Seacock Placement 
Date: Wed, 21 Aug 2002 16:03:14 -0400 
Mike, 
Since you have seen both designs #272 and #114 were the same it seems that 
on the newer boats Whitby made the seacock accessible. In your opinion since

both of the original holes were filled with epoxy, would it better to 
install the thru hulls and ball valves under the settee? 
Stephen 
-----Original Message----- 
From: Mike Lehman [mailto:sail_505 at hotmail.com] 
Sent: Wednesday, August 21, 2002 3:32 PM 
To: public-list at alberg30.org 
Subject: RE: [Alberg30] Head Seacock Placement 
Mine on #505 is in the same place as Neal's. On Valency #272 it is forward 
of the main cabin bulkhead under the shelf that holds the toilet. On #114 
???? 
Mike Lehman 
"Gilleleje" #505 
Hammer: Originally employed as a weapon of war, the hammer nowadays is used 
as a kind of divining rod to locate expensive car parts not far from the 
object we are trying to hit. 
----Original Message Follows---- 
From: Neal Jackson 
Reply-To: public-list at alberg30.org 
To: "'public-list at alberg30.org'" 
Subject: RE: [Alberg30] Head Seacock Placement 
Date: Wed, 21 Aug 2002 14:23:45 -0400 
Mine (No. 486, with a liner) is located under the port settee, about six 
inches aft of the wall that separates that locker from the head area. I is 
about four inches inside the vertical frame of that settee. 
-----Original Message----- 
From: sousa, stephen (ENG) [mailto:sousa_stephen at emc.com] 
Sent: Wednesday, August 21, 2002 2:10 PM 
To: 'public-list at alberg30.org' 
Subject: [Alberg30] Head Seacock Placement 
I am in the process of preparing the installation of the new head and 
holding tank. I removed the false floor from the head in #114 to find the 
original floor in place (boy does that sae some time) . The fittings were 
removed from the hull and holes filled with epoxy. The 1 1/2 fitting backing

plate remains on the hull so that placement is straight forward. The 
question I have and hopefully someone can assist is the placement for the 
3/4 thru hull fitting. It would seem to be mounted under in the hull under 
the floor with the hose running up through the hole into the head intake. 
Would anyone have a recommendation or suggestion? 
Thanks, 
Stephen 
Carina Vela 
#114 
_____ 
Chat with friends online, try MSN Messenger: Click 
Here 
+-----------------------------------------------------------+ | Sale on Yale

& New England Ropes. Save up to 25 percent. | | 
http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 | 
+-----------------------------------------------------------+ 
_______________________________________________ Public-list mailing list -- 
Public-list at alberg30.org 
http://www.alberg30.org/mailman/listinfo/public-list To unsubscribe: email 
to Public-list-request at alberg30.org Include command "unsubscribe " in 
subject or body. Use command "help" for more options. 

  _____  

Join the world's largest e-mail service with MSN Hotmail. Click
<http://g.msn.com/1HM1ENUS/c157??PI=44364> Here
+-----------------------------------------------------------+ | Sale on Yale
& New England Ropes. Save up to 25 percent. | |
http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
+-----------------------------------------------------------+
_______________________________________________ Public-list mailing list --
Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list To unsubscribe: email
to Public-list-request at alberg30.org Include command "unsubscribe " in
subject or body. Use command "help" for more options.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20020825/6c5eb24f/attachment-0004.htm>