[Alberg30] A4 over heating

[John P Reber]

C.B. Currier wrote:

> Try www.moyermarine.com
>
> One acid wash I beleive is muriatic acid. Which I beleive accomodates
> removing the "scale" from the inside of the motor. The best move is 
> first to
> drain the motor, pull the starboard inspection plate into the 
> waterjacket.
> run a shop vac and suck all of the debris. Then force air into there and
> blow .  This will make a bit of a mess but will help. Then close up 
> and try
> the acid flush by placing the water intake into the solution you choose.
> Sorry I do not have the correct flush recipe.
> But for the most part I have had more success with scale and 
> obstructions by
> chasing them down with a shop vac.
>
Where is this inspection plate, I just looked at photos from the A4 
manual (online at htp://www.geocities.com/atomfour/) and didn't see an 
inspection plate.

>
> PS anyone need an atomic 4? I got 6
>
WOW, and I thought I was lucky having 2.

-- 
John P. Reber
Perdida, Alberg30 #456




 +-----------------------------------------------------------+
 | Sale on Yale & New England Ropes.  Save up to 25 percent. |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1029330898.0