[Alberg30] A4 over heating

[John P Reber]

C.B. Currier wrote:

>on the starboard side(assuming the flywheel is the towards the bow) where
>the t connector fits onto the motor, or behind the alternator. Where the t
>connector fit is a good source of potential blockage. First try taking off
>the connector and see if it is blocked. It should be made of brass but water
>scale can stop it up. Likely this may be the first and most logical problem.
> Also look at the lines running from the h20pump. Make sure they are clear
>as well.Only do the removal of the inspection plate if all else fails. This
>could be a bear to get back together.
>
Thanks, with this and my new understanding of the cooling system from 
Brian, I feel better equipped to troubleshoot this.

---
John P. Reber
Perdida, Alberg30 #456



 +-----------------------------------------------------------+
 | Sale on Yale & New England Ropes.  Save up to 25 percent. |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1029346949.0