[Alberg30] Re: wiring

[Bob Chambers]

And don't forget that our older boats often need frequent insurance surveys
(I am required to have one every three years!) and poor wiring is one of the
first things they will fail you on.  I personally use a ratcheted crimp tool
AND solder AND put heat shrink over all but the very end of the terminal.  I
also cannot emphasize enough the merits of using the tinned marine wire.  I
have seen failures due to the 'green mush' several times.

Bob Chambers

 +-----------------------------------------------------------+
 | Sale on Yale & New England Ropes.  Save up to 25 percent. |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1030550580.0