[Alberg30] A30 mast support beam

[Dan Morley]

Thanks Michael,

Dan

schuylki at vanent.vanebros.com wrote:

> Tricky business, that. I had made some cardboard templates to make my own
> aluminum plates before deciding to bite the bullet and get the plates from
> Washingtom Co. My cardboard templates didn't come even close to the
> aluminum when it arrived. Must be the technique :)
>
> Michael
> #220
> P.S. getting the raw aluminum from which to cut wasn't going to be cheap.
>
>  +-------------------------------------------------------------------+
>  |  Foul weather?  Deep discounts on Henri Lloyd and 2001 Gill gear. |
>  | *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 *** |
>  +-------------------------------------------------------------------+
>
> _______________________________________________
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.

 +-------------------------------------------------------------------+
 |  Foul weather?  Deep discounts on Henri Lloyd and 2001 Gill gear. |
 | *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 *** |
 +-------------------------------------------------------------------+


_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1013775754.0