[Alberg30] Exhaust system

[Kevin Blanc]

I'll bet it would take a machine shop no time to grind it flat...

chrishardy wrote:

> I agree.  I should fix it pronto, I've already had it apart this 
> spring tried to fix it found the gasket was junk. My problem is the 
> flange is not flat anymore making a good seal impossible. I keep a 
> close watch on it.  The CO detector is a good investment in any case.  
> My elbow and riser are in good shape along with the water lift muffler 
> and hose.
>
> +---------------------------------------------------------------+
> |  Boatowners Mechanical And Electrical Manual by Nigel Calder  |
> | http://www.amazon.com/exec/obidos/ASIN/007009618X/alberg30-20 |
> +---------------------------------------------------------------+
>
> _______________________________________________
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
>


 +---------------------------------------------------------------+
 |  Boatowners Mechanical And Electrical Manual by Nigel Calder  |
 | http://www.amazon.com/exec/obidos/ASIN/007009618X/alberg30-20 |
 +---------------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1026172794.0