[Alberg30] Engine Stalls

[Capnreitz at aol.com]

If after it starts again if it again stalls, your pulling crud up into the 
filter.
If it continues to run the crud may have passed. I would look into the 
carburetor again, especially the low speed jet, open every little screw. I 
had a similar problem, rebuilt the card twice. Finally had someone else look 
at it. They found a jet I had missed, and that was it. This year it was the 
idle jet and a slight float misadjustment. It purrs like a kitten now.
Ralph Reitz
Dances With Waves #457
 //===============================================================//
         Cruising the Chesapeake: A Gunkholer's Guide

  My favorite Chesapeake Bay guidebook. While it mentions marinas,
  it concentrates on anchorages--the kind of places I prefer to spend
  my time. And in addition to listing shore facilities, it rates each
  location for Beauty/Interest and Protection. This is the guide you
  need to really cruise the Chesapeake Bay--a smorgasbord of small
  creeks and coves.

   http://www.amazon.com/exec/obidos/ASIN/0071363718/alberg30-20
 //===============================================================//

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1027824919.0