[Alberg30] Pre-Rookie Question

[Douglas Snell]

Mike-

I am looking at A30's as a move up for my expanding family.  We have an 18mo
old and a 4mo old (yes, that's close).  How does your family do on the boat?
Is the A30 a good size for this age group?

Doug Snell
  -----Original Message-----
  From: public-list-admin at alberg30.org
[mailto:public-list-admin at alberg30.org]On Behalf Of Hiesener, Michael
  Sent: Monday, July 29, 2002 10:15 AM
  To: 'public-list at alberg30.org'
  Subject: RE: [Alberg30] Rookie questions


  Mary & Bill,

  Congrats on delivery of your boat!

  My partner an I recently did quite a bit of work on our boat and I will
throw in my 2 cents...

  1.  We repainted the area behind the settees with a mildew resistant
kitchen latex paint.  We sanded the interior and striped off the old paint
in some areas and applied 2 coats of the paint.  While the ideal fix would
probably be to strip off the old paint and apply a marine two part
paint...this seemed like quite an undertaking, especially when we had
multiple projects requiring time and energy.  Our boat does have a solar
powered vent that circulates the air and helps to keep the interior moisture
down.

  2.  The old compass was broken and we replaced it with a bulkhead mounted
Plastimo Contest 101.   We are planning on racing and I like the readability
of this compass.  The accuracy seems good when compared to a handheld GPS.
Our "little compartment" was for a box compass.  It has a hinged cover and a
pad eye which we connect a tether and harness in an attempt to keep our 18
month old son on the boat!  Might be a good location for a GPS mount.

  3.  No suggestion on how to upgrade the locker panels...but we have a
small soft sided cooler that fits perfectly inside the icebox hatch.  Helps
keeps everything cold and easily accessible from the cockpit.

  4.  Sounds like a good location for a Nav Station!

  Look forward to seeing you on the water!

  Best Regards,

  Mike Hiesener
  Terrapin  #254
  Annapolis

   -----Original Message-----
  From: Mary & Bill Mahony [mailto:mabwjm at starpower.net]
  Sent: Sunday, July 28, 2002 7:25 PM
  To: public-list at alberg30.org
  Subject: [Alberg30] Rookie questions


    As I mentioned earlier this week, we just acquired hull #276.  She's
currently on blocks down at Solomon's getting some survey-identified work
done prior to launching.  I took my wife down to see her for the first time
today (did I mention we bought her sight-unseen via the net?).  As we went
through the boat, a couple areas caught our attention that I wanted to ask
your thoughts on:

    1.  We removed some carpeting lining the hull from the interior under
the hanging cabinets in the salon and behind the settees....the removal left
some foam backing and glue residue on the interior hull.  I'm thinking the
right answer is just to sand the foam and glue remnants down (there's also
some deteriorated finish on the interior glass) and repaint.  Any advice
concerning how to sand and what to use to repaint?  Was this finish done in
plain interior white in the boats as they came off the line?

    2.  The boat has no compass...is there a recommendation for a compass?
Is the little compartment just aft of the companionway the preferred
location?

    3.  The cockpit seat locker panels are deteriorated...any info on what
kind of wood these were originally?  Also, the cockpit access hatch to the
ice box is deteriorated.  I noticed a Styrofoam backing, also looking pretty
sad--any suggestions for upgrades?

    4.  Previous owners had wedged a microwave into the aft starboard salon
overhead cabinet.  We don't want/need the appliance, and since the cabinet
space is already cut away, I'm thinking of crafting a cabinet ala Carina
Vela as a Nav station in this space--any pros or cons?

    Apologies for the litany of questions...maybe a precursor of more to
come!  ;-)
    Thanks, Bill

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20020729/aae31193/attachment-0008.htm>