Fw: [Alberg30] Alcohol stove parts

[Brian and Elaine Timmins]

I should have thought of this on the last post. Click the link for a picture
of my Origo installation.
http://community.webshots.com/photo/26845753/26846262dCoMNOrENn
It normally has a cutting board top that isn't in the photo
Brian
----- Original Message -----
From: "Brian and Elaine Timmins" <timmins at optonline.net>
To: <public-list at alberg30.org>
Sent: Friday, June 21, 2002 4:12 PM
Subject: Re: [Alberg30] Alcohol stove parts


> It's not hard to make the hole smaller. Just think about making a picture
> frame with teak lumber (strips). The conversion is worth it.
> Brian
> ----- Original Message -----
> From: "Bob" <rjohns3 at optonline.net>
> To: <public-list at alberg30.org>
> Sent: Friday, June 21, 2002 3:47 PM
> Subject: Re: [Alberg30] Alcohol stove parts
>
>
> >
> > On Friday, June 21, 2002, at 03:29  PM, Brian and Elaine Timmins wrote:
> >
> > > I'm not sure about your parts interchangeability. But, as far as the
> > > drop in
> > > aspects of the
> > >  is concerned, it will drop right through if your
> > > present stove is gimballed!! When I did my replacement, I had to build
> > > up
> > > and in, a smaller openning using Teak to hold the Origo.
> > > Brian   (ex #497)
> >
> > Brian,
> >
> > Thanks for that information. I was trying to reconcile the catalog sizes
> > and I just couldn't make my measurements prove that it was "drop-in".( I
> > do have gimbals.) I don't have the time to do a lot of modification.
> > Your information saved me from a lot of problems.
> >
> > I've enjoyed reading your contributions to this list.
> >
> > Bob, A30, #397
> >
> >  +---------------------------------------------------------------+
> >  |  Boatowners Mechanical And Electrical Manual by Nigel Calder  |
> >  | http://www.amazon.com/exec/obidos/ASIN/007009618X/alberg30-20 |
> >  +---------------------------------------------------------------+
> >
> > _______________________________________________
> > Public-list mailing list -- Public-list at alberg30.org
> > http://www.alberg30.org/mailman/listinfo/public-list
> > To unsubscribe: email to Public-list-request at alberg30.org
> > Include command "unsubscribe <password>" in subject or body.
> > Use command "help" for more options.
>

 +---------------------------------------------------------------+
 |  Boatowners Mechanical And Electrical Manual by Nigel Calder  |
 | http://www.amazon.com/exec/obidos/ASIN/007009618X/alberg30-20 |
 +---------------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.