[Alberg30] Alcohol stove parts

[Brian and Elaine Timmins]

I'm not sure about your parts interchangeability. But, as far as the drop in
aspects of the Origo is concerned, it will drop right through if your
present stove is gimballed!! When I did my replacement, I had to build up
and in, a smaller openning using Teak to hold the Origo.
Brian   (ex #497)
----- Original Message -----
From: "Bob" <rjohns3 at optonline.net>
To: <public-list at alberg30.org>
Sent: Friday, June 21, 2002 3:13 PM
Subject: [Alberg30] Alcohol stove parts


> Hi List,
>
> I need to replace the check valve at the bottom of the pump on our
> Homestrand two burner pressurized alcohol stove. I believe that Kenyon
> replacement parts will work in the Homestrand stove. Those parts are
> available from West Marine. I believe that Homestrand is out of business
> and/or absorbed by Kenyon.
>
> Can anyone confirm that the Kenyon parts will fit?
>
> The part I need to change apparently needs a special tool. I believe
> that the "Wrench for check valve and nozzle.", (#154989 in the West
> catalog, Kenyon B93005) is the tool I need and that the "Pump check
> valve", (West #259505, Kenyon B93014) is the check valve.
>
> Are these t he parts I need to order?
>
> If we were still cruising I would probably change to an Origo
> non-pressurized alcohol stove. They claim that Origo #4000CB is a
> "Drop-in Style" but they don't say specifically that it replaces the
> Kenyon/Homestrand. I still would prefer to repair the old stove but
> might switch to the Origo if I can't get the parts for the Homestrand.
>
> Thanks for the help.
>
> Bob Johns, A30, #397
>
>  +---------------------------------------------------------------+
>  |  Boatowners Mechanical And Electrical Manual by Nigel Calder  |
>  | http://www.amazon.com/exec/obidos/ASIN/007009618X/alberg30-20 |
>  +---------------------------------------------------------------+
>
> _______________________________________________
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.

 +---------------------------------------------------------------+
 |  Boatowners Mechanical And Electrical Manual by Nigel Calder  |
 | http://www.amazon.com/exec/obidos/ASIN/007009618X/alberg30-20 |
 +---------------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1024687770.0