[Alberg30] Prop Zincs

George Dinwiddie gdinwiddie at min.net
Fri Mar 15 10:14:09 PST 2002

I use a Camp ZPC-1 zinc.  
This is a bronze prop nut with a screw-on zinc.  I trimmed the
bronze nut down, but still have to cut off the tip of the zinc
to clear the rudder.

 - George

> Snelham at aol.com said:
> For a number of years I've used a Perry nut, a brand of prop nut with the 
> zinc bonded to a bronze nut. They came from Perry's Harbor in Isleton, CA in 
> the Sacramento River delta not far from San Francisco Bay where I sail.
> These are no longer available, and I was wondering what others used for 
> zincs, given the limited clearance of the shaft, prop and rudder. Your 
> experience would be appreciated.

  George Dinwiddie                             gdinwiddie at alberg30.org
  The gods do not deduct from man's allotted span those hours spent in
  sailing.                                    http://www.Alberg30.org/

 | Get in gear for an early Spring with SailNet's ten percent discount |
 |  *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 ***  |

Public-list mailing list -- Public-list at alberg30.org
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.


More information about the Public-List mailing list