[Alberg30] Compaionway slide

[t.k.blanc at att.net]

I could be wrong, but doesn't the winch handle fit the 
slot?
> Bill; The previous answer is correct. the pieces of metal are 2" x 3/4"x 
> 1/8"; they are drilled and countersunk for two wood screws. eddiediver at aol.com
> 
> I have a problem: I have just become the maintenance manager for an Alberg 30 
> for a sailing club. The cockpit has 2 jib winches; bronze Merriman or 
> Coastal?  I am trying to take them apart for cleaning. They have a recess in 
> the top, under the slots for the winch handle. The recess has a 1/8" wide 
> screwdriver slot? Is there a tool for this slot? Other than getting a bar of 
> metal (or the above mentioned hatch hold downs)? eddiediver at aol.com
>  +---------------------------------------------------------------------+
>  | Get in gear for an early Spring with SailNet's ten percent discount |
>  |  *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 ***  |
>  +---------------------------------------------------------------------+
> 
> 
> _______________________________________________
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
> 
 +---------------------------------------------------------------------+
 | Get in gear for an early Spring with SailNet's ten percent discount |
 |  *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 ***  |
 +---------------------------------------------------------------------+


_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1016580489.0