[Alberg30] Prop Zincs

[Brian and Elaine Timmins]

I have used Camp Co. Part# P-2 for 7/8 shafts. It basically is a donut of
zinc mounted on a Bronze washer. Install the prop, put on one nut, then the
P-2 Zinc donut, then the second nut and cotter pin. It works great under
normal conditions and doesn't add hardly any length.
Regards,
Brian    as of about 5PM today, former owner of #497
----- Original Message -----
From: "George Dinwiddie" <gdinwiddie at min.net>
To: <public-list at alberg30.org>
Sent: Friday, March 15, 2002 1:14 PM
Subject: Re: [Alberg30] Prop Zincs


> I use a Camp ZPC-1 zinc.
> http://www.alberg30.org/maintenance/disorganized/propnut.gif
> This is a bronze prop nut with a screw-on zinc.  I trimmed the
> bronze nut down, but still have to cut off the tip of the zinc
> to clear the rudder.
>
>  - George
>
> > Snelham at aol.com said:
> >
> > For a number of years I've used a Perry nut, a brand of prop nut with
the
> > zinc bonded to a bronze nut. They came from Perry's Harbor in Isleton,
CA in
> > the Sacramento River delta not far from San Francisco Bay where I sail.
> >
> > These are no longer available, and I was wondering what others used for
> > zincs, given the limited clearance of the shaft, prop and rudder. Your
> > experience would be appreciated.
>
> --
>  ----------------------------------------------------------------------
>   George Dinwiddie                             gdinwiddie at alberg30.org
>   The gods do not deduct from man's allotted span those hours spent in
>   sailing.                                    http://www.Alberg30.org/
>  ----------------------------------------------------------------------
>
>  +---------------------------------------------------------------------+
>  | Get in gear for an early Spring with SailNet's ten percent discount |
>  |  *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 ***  |
>  +---------------------------------------------------------------------+
>
>
> _______________________________________________
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
>

 +---------------------------------------------------------------------+
 | Get in gear for an early Spring with SailNet's ten percent discount |
 |  *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 ***  |
 +---------------------------------------------------------------------+


_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1016233848.0