[Alberg30] Compaionway slide

[sousa, stephen]

Eddie,

The winch handle generally fits the screw.

Stephen

-----Original Message-----
From: EddieDiver at aol.com [mailto:EddieDiver at aol.com]
Sent: Monday, March 18, 2002 6:45 PM
To: public-list at alberg30.org
Subject: [Alberg30] Compaionway slide


Bill; The previous answer is correct. the pieces of metal are 2" x 3/4"x 
1/8"; they are drilled and countersunk for two wood screws.
eddiediver at aol.com

I have a problem: I have just become the maintenance manager for an Alberg
30 
for a sailing club. The cockpit has 2 jib winches; bronze Merriman or 
Coastal?  I am trying to take them apart for cleaning. They have a recess in

the top, under the slots for the winch handle. The recess has a 1/8" wide 
screwdriver slot? Is there a tool for this slot? Other than getting a bar of

metal (or the above mentioned hatch hold downs)? eddiediver at aol.com
 +---------------------------------------------------------------------+
 | Get in gear for an early Spring with SailNet's ten percent discount |
 |  *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 ***  |
 +---------------------------------------------------------------------+


_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.
 +---------------------------------------------------------------------+
 | Get in gear for an early Spring with SailNet's ten percent discount |
 |  *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 ***  |
 +---------------------------------------------------------------------+


_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1016560138.0