[Alberg30] Another Hull Problem

[chrishardy]

I would suggest using a large router to cut the hole... cleaner cut 
radiused corners etc. much better way.  You can rent large porter cable 
routers at rental stores around the country....

FINNUS505 at aol.com wrote:

>
>Hi Eddie,
>
>I had the same problem on 255 when I got her. It was a volvo, but taller than 
>the A4, it cut off access to the back of the engine, etc.
>
>I bought a Bomar access panel, at West Marine. It was 19" by 24", or 
>something like that. In 1997, it cost about 70 bucks.
>
>It is white plastic, and once in place, I did not like the way it gave 
>underfoot. I was afraid if someone jumped on it from the seat or fell on it, 
>it might break. My solution is to make a strong cockpit sole grating, which I 
>wanted to do anyway. There are aluminum access hatches, like on comm. fishing 
>boat decks. They run about 300 bucks. Hamilton Marine in Maine has them. You 
>could find a second hand one at one of the marine salvage places. Mott's in 
>Maine would be a good place to start looking if that is what you wanted.
>
>Gordon White's A 30 came with a regular Bomar for hatch, smoked Lexan, 
>aluminum frame, etc, in the spot above the stuffing box. He likes it, and 
>says it is plenty strong enough.
>
>The A30 cockpit sole is tough. Mine was two layers of masonite core, with 
>three layers of glass. The vibration from my sawzall, my reciprocating saw, 
>caused some delamination at the hole's edge. I repaired it with thinned 
>epoxy, Git Rot, that penetrates well.  I bolted a 2x4 athwartships across the 
>underside of the sole just aft of the panel to make up for any weakening of 
>the sole from the hole. I think if I had changed the blades on the sawzall 
>more often, there would have been less vibration. The GitRot is a good way to 
>seal up the masonite sandwich to prevent any moisture getting in there, 
>though, anyway. I bedded the access panel in silicone sealant.
>
>Even with the A4, I don't know how people take these boats out with such poor 
>access to the stuffing box and scupper sea cocks.
>
>Write if you have any questions,
>
>Lee Trachtenberg
>Stargazer #255
> +---------------------------------------------------------------------+
> | Get in gear for an early Spring with SailNet's ten percent discount |
> |  *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 ***  |
> +---------------------------------------------------------------------+
>
>
>_______________________________________________
>Public-list mailing list -- Public-list at alberg30.org
>http://www.alberg30.org/mailman/listinfo/public-list
>To unsubscribe: email to Public-list-request at alberg30.org
>Include command "unsubscribe <password>" in subject or body.
>Use command "help" for more options.
>
>


 +---------------------------------------------------------------------+
 | Get in gear for an early Spring with SailNet's ten percent discount |
 |  *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 ***  |
 +---------------------------------------------------------------------+


_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1017493018.0