[Alberg30] Mast Step Bolts

[FITZONELOVE at aol.com]

I re-stepped the mast today, and things were going just a little bit too 
well, and as I tried to tighten the 4 bolts that hold the mast to the deck 
plate,  3 OUT OF 4 bolts STRIPPED THE THREADS IN THE DECK PLATE!!! DAMN!!  I 
can see why this was inevitable; 1968 boat, SS bolts into threaded cast 
aluminum, galvanic corrosion, etc.  Has anyone had this happen to them?  I'm 
guessing the solution is drill and tap larger bolts into the existing holes.  
I assume there is not a lot of pressure on these bolts, and that they are 
there to prevent side to side motion.  I am suprised that both faces of the 
deck mount are flush, with no fitted joints, such as a square peg fitting 
into a square cutout.  But I have a boat on the mooring with 1 bolt holding 
the mast to the deck, and want to be able to sleep at night.  Your 
suggestions are appreciated.  Thanks,
Joe Fitzpatrick  #186  ONE LOVE
 +-----------------------------------------------------------+
 | ** Skymate Windmeter $18.00 off! Product code JDCSM-18 ** |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+


_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1021948144.0