[Alberg30] Additional Info on Mast step

[Kevin Blanc]

It's what I plan to do until I can get the mast down and get the plate 
off and do the permanent upside-down bolt repair.
Do you remember what size the bolts are? I'm thinking of  going a 16th 
smaller because I really don't want to enlarge the holes in the mast base.

Tom Sutherland wrote:

>George & Mark,
>
>Thanks for these very good illustrations. This brought to mind what I
>did to solve this problem with my own mast step a couple of years ago,
>and I may have commented on it at the time.
>
>I installed what is called a "Helicoil". This is a brand name and I may
>not have spelled it exactly right but most of you will know it as a
>thread insert which can be found at any auto supply house or machine
>shop. It consist of an over size tap and several stainless steel coils
>of threaded insert which resembles a section of spring.
>
>You buy the size which corresponds to the bolt which has stripped out.
>The kit comes with the proper size tap which will "not" be a common size
>that you might have, it is special made to correspond with the ss
>threaded insert. You will also get several ss inserts (may very from one
>brand to another) but you can buy more inserts if needed. Also it will
>have what they refer to I believe as an insertion tool which is no more
>than a bolt the same size as the one you are retapping  with a grove on
>the bottom to help screw in the ss insert in your new threaded hole.
>
>My rational in using this as a solution to this particular problem is
>the folling: (some may or may not agree) Any reaction between the ss
>insert and the mast step is ok because this will never be removed
>anyway. It may even be a good idea to use a little thread lock. I do not
>believe there should be any problem between the ss insert and the ss
>bolt, and so far this has been the case. You could use a little antisize
>on the bolt thread if you like.
>
>It is my recolection that these kits sell for about twenty dollars or so
>and can be used in future apprications for that size bolt.
>
>Any questions or comments?
>
>Tom S
>A30  412
>
>
>George Dinwiddie wrote:
>
>>Anyone interested in seeing Mark's photos can take a look at
>>http://www.alberg30.org/maintenance/disorganized/maststep/
>>
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+
> | Help keep this site afloat.  Use this link when shopping at SailNet |
> |      http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066      |
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+
>
>_______________________________________________
>Public-list mailing list -- Public-list at alberg30.org
>http://www.alberg30.org/mailman/listinfo/public-list
>To unsubscribe: email to Public-list-request at alberg30.org
>Include command "unsubscribe <password>" in subject or body.
>Use command "help" for more options.
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20020524/bfdc87d2/attachment-0008.htm>