[Alberg30] battery cables

[George Dinwiddie]

Jay,

I'm pretty sure my cables are AWG 4.  It seems to me I used to use
AWG 2, and the only difference was the difficulty passing them up
from the batteries to the engine compartment.  I use two separate
negative cables.

If the engine starts easily, why are you replacing the cables?

 - George

> Jay Davenport said:
> 
> I am replacing the battery cables on Revolution, A30
> #526, which is Atomic 4 powered. The engine normally
> starts quickly and easily, but I'm not sure that the
> existing cables are the correct capacity. What is the
> recommendation of A30 Captains with Atomic 4 engines
> as to the correct wire gauge for the 2 Positive
> battery cables and the Negative battery cable?

-- 
 ----------------------------------------------------------------------
  George Dinwiddie                             gdinwiddie at alberg30.org
  The gods do not deduct from man's allotted span those hours spent in
  sailing.                                    http://www.Alberg30.org/
 ----------------------------------------------------------------------

 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+
 | Help keep this site afloat.  Use this link when shopping at SailNet |
 |      http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066      |
 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1022613532.0