[Fwd: Re: [Alberg30] stem head fitting]

George Dinwiddie gdinwiddie at alberg30.org
Thu Nov 14 16:48:10 PST 2002


There's about 5 bolts down through the deck and two that go diagonally
through the bow.  Also, there's two machine screws holding the stainless
strap on the front of the stem fitting.  I think all of these are 1/4-20.

What's your plan on the bow roller?  I've been thinking of doing
something custom, too.

   - George

Dave Terrell wrote:

 > new style boat - built in 1970.
 >
 >
 > >>>gdinwiddie at min.net 11/14/02 05:30PM >>>
 >
 > Do you have a new-style or old-style boat?
 >
 >
 > >Dave Terrell said:
 > >
 > >I have a plan to make an anchor roller fitting that will require me
 >
 > to
 >
 > >take off the stem head fitting at the bow of the boat. I think we
 >
 > had
 >
 > >some discussion of this last winter, but since I could not find it
 >
 > after
 >
 > >searching the archives for about an hour last  night, I  thought I
 >
 > would
 >
 > >ask - how does one remove the stem head fitting? or is it a "can't
 >
 > be
 >
 > >done item"?
 > >
 > >Thanks in advance for any help on this matter.
 >
 >

-- 
  ----------------------------------------------------------------------
   George Dinwiddie                             gdinwiddie at alberg30.org
   The gods do not deduct from man's allotted span those hours spent in
   sailing.                                    http://www.Alberg30.org/
  ----------------------------------------------------------------------

 +----------------------------------------------+
 | http://www.alberg30.org/store/Calendars.html |
 | Have you got your 2003 calendars yet???????? |
 +----------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1037321290.0


More information about the Public-List mailing list