[Alberg30] Mainsail halyard

[Brian and Elaine Timmins]

Here's to hoping it fits (or it's not too expensive to make it fit)
Brian
  ----- Original Message ----- 
  From: Peter Amos 
  To: public-list at alberg30.org 
  Sent: Saturday, November 02, 2002 6:27 PM
  Subject: [Alberg30] Mainsail halyard


  The mast is coming down when I get back to the U.S. in January and I shall inspect the size of the aperture above the sheave very carefully.Hopefully there will be enough space to take a 3/8" halyard but if  there is  a problem one of the suggested alternatives will be applied.It is possible I suppose that  there were some small manufacturing variations either in the sheave diameter or its' housing.An eigth
  would make a big difference.Fingers crossed and thanks for the responses.
  Peter Amos #478 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20021102/b4c758b5/attachment-0008.htm>