[Alberg30] profurl roller furling

[Dave Terrell]

great. that would be really helpful and much appreciated.

>>> sousa_stephen at emc.com 11/12/02 09:28AM >>>

Dave,

Since the mast is located at the boat yard I haven't had a chance to take a few photos. I plan on being at the boat yard on 11/17 and will take a few photos. A few of the other folks are asking to see these same photos of the new mast head.

Stephen


-----Original Message-----
From: Dave Terrell [mailto:DTERRELL at message.nmc.edu]
Sent: Monday, November 11, 2002 3:51 PM
To: public-list at alberg30.org
Subject: [Alberg30] profurl roller furling


Earlier this year we had a discussion about using profurl roller furling on our boats. I shared some of my challenges and Stephen indicated that he had modified the masthead to deal with the problem. Now that sailing season is over, I would l ike to look at adapting my masthead so it works better with the profurl. At the time of the discussion, it was indicated that pictures or drawings could be provided of what you did. Could this be done now? I am assuming that nothing as been placed on the web site, but will look to see if i did  not miss something - which is always possible. 

David - 432 - talisman.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20021112/33c26049/attachment-0008.htm>