[Alberg30] last days of Whitby Boat Works

[George Dinwiddie]

John,

Is Hull Crafter in Whitby?  Does that number format look at all
familiar?

 - George

> John Birch said:
> 
> A Hull Crafter - One of many producers of the Douglas 31 & 32?
> 
> I strongly doubt Whitby made a pseudo 30.
> 
> John
> 
> ----- Original Message ----- 
> From: "George Dinwiddie" <gdinwiddie at alberg30.org>
> To: <public-list at alberg30.org>
> Sent: Wednesday, November 13, 2002 8:35 PM
> Subject: [Alberg30] last days of Whitby Boat Works
> 
> 
> > Does anybody know about unusual Alberg 30's being built at Whitby toward 
> > the end of the production run?  I've been contacted about a boat that 
> > seems to be an Alberg 30, but the cabin doesn't step down at the mast. 
> > Even more unusual, the transom doesn't have a hull number molded into 
> > it, though this is ostensibly a 1984 boat.  The hull number given to the 
> > current owner by the previous owner is 1984HCMEM10D69435 which is unlike 
> > anything I've ever seen before.
> > 
> > Any clues as to what's going on would be greatly appreciated.

-- 
 ----------------------------------------------------------------------
  Hope your road is a long one.                        George Dinwiddie
  May there be many summer mornings when,       gdinwiddie at alberg30.org
  with what pleasure, what joy,                 http://www.Alberg30.org
  you enter harbors you're seeing for the first time;
                                           from 'Ithaka' by C.P. Cavafy
 ----------------------------------------------------------------------

 +----------------------------------------------+
 | http://www.alberg30.org/store/Calendars.html |
 | Have you got your 2003 calendars yet???????? |
 +----------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1037297996.0