[Alberg30] profurl roller furling
Brian and Elaine Timmins
timmins at optonline.net
Thu Nov 14 14:59:32 PST 2002
As a side question re: Profurl, those of you that have them, how do you
like them?
I'm still back and forth between Profurl and Schaffer (NC42 vs 2100 in my
case). I've always considered Profurl the best but the discussions I had
with various resellers during the boat show have me thinking the Schaffer
system might be better in a pure cruising environment. Everyone stressed how
free spinning the upper swivel is on the Schaffer vs the sealed steel
bearing on the Profurl.
Anyone care to comment?
Thanks,
Brian ex#497
----- Original Message -----
From: "Dave Terrell" <DTERRELL at message.nmc.edu>
To: <public-list at alberg30.org>
Sent: Thursday, November 14, 2002 5:36 PM
Subject: [Alberg30] profurl roller furling
> I have a question for those of you who have profurl roller reefing on
> your boats and did not revise mast head fitting as Stephen did.
>
> They are:
>
> 1. Is the halyard block for the genoa above the wrap stop? and if so by
> how much?
>
> 2. How much of the wire portion of the head stay is exposed before one
> gets to the wrap stop?
>
> 3. Is the shackle on the genoa halyard block a swivel block or a fixed
> block?
>
> Others seem not have had the problems I had last spring when I
> installed my profurl reefing system, and I am trying to figure out where
> I went astray. I hope your answers to these questions can help me.
>
> I am also eager as I think some of you are to see how Stephen solved
> the installation problem.
>
> Thanks as always for the help.
> +----------------------------------------------+
> | http://www.alberg30.org/store/Calendars.html |
> | Have you got your 2003 calendars yet???????? |
> +----------------------------------------------+
>
> _______________________________________________
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
+----------------------------------------------+
| http://www.alberg30.org/store/Calendars.html |
| Have you got your 2003 calendars yet???????? |
+----------------------------------------------+
_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.
1037314772.0
More information about the Public-List
mailing list